Overview

RF-ID K1: KENSAI anti theft system.

Intro:

This is the first RFID immobiliser to be released from the new ATRD KENSAI range. It has the same security features as the biometric system, but instead of a fingerprint scanner it utilizes RF-ID technology.


The systems consist of three main parts: a controller, immobiliser module and a digital encoded tag, which the owner of the vehicle would keep in their pocket,wallet etc ( separate from their keys). Before you start the vehicle the immobiliser will search for the tag. If the correct tag is found the vehicle will start as normal.

If no tag is found within several meters, the system automatically goes into guarding mode and the vehicle remains immobilised.

Different modules are available for the RD-ID K1 making it compatible with any vehicle and alarm system including; vehicles equipped with remote engine start.







How it works ::

Step1 = The vehicle automatically immobilises after the vehicle is switched off.

Step2 = To disarm the immobiliser, turn the key to the ACC position. The system then begins search procedure for the tag and               identification : this is indicated by the valet switch LED illuminating within the vehicle.

Step3 = On positive tag identification the system will deliver melodious buzzer signal, and the LED will change color to               green.

The immobiliser is deactivated and the vehicle is ready to start.

If within 20 seconds the system unit will not receive reply from tag, warning sound of the buzzer will be emitted, indicator color will change to red and the system will go into mode "Guarding". Then controller will cyclically search for tag, accompanying the process with blinking of LED from red to green, until the tag is detected and identified the vehicle will remain immobilised.

  ATRD RFID Immobiliser Tag.

For further information contact: ATRD: info@atrd.co.uk

Specifications

• Compact RFID tags -size (4.5 X 2.7)
  
  
• Built-in movement sensor allows changing the mode into “Sleep” in case the tag is unmoved for 5 minutes. - resource of power element work essentially increases- -possibility of unauthorised data reading under radio channel is excluded.
  
  
• Self-control of RFID-tag base - possibility of registering the additional set of tags (5 user tags) - information about the loss mark can be deleted in case of loss or theft
  
  
• 1 circuit immobilisation, Capable number of immobilisation circuits: unlimited (addition modules required).
  
  
• Built-in light diode - allows tracking the mark mode “Sleep” and “Wake’-allows tracking the state of power element. In case of discharge of power element, the light diode begins to give the typical signals.
  
  
• Auto arming immobilisation (instant after switching the vehicle off.
  
  
• Time of the system readiness for operation after turning on, not more than 1 second
  
  
• Simple vehicle owner control to add and delete individual users from system memory.
  
  
• Built in system reset.
  
  
• Output siginals - on positive identification and negative identification.
  
  
• Combinational personal pin code over-ride to replace tag
  
  
• Easy access Valet mode for biometric immobilisation shut down,(restores back to normal factory key start, no tag is needed!).
  
  
• Working temperature – from -40C up to +85C
  
  
• Relative air humidity at temperature +25C - 98 %
  
  
• Anti Hi jack features available -(additional module required).
  
  

  ATRD RFID Immobiliser Scanner.

For further information contact: ATRD: info@atrd.co.uk